Protective clothing free shipping, delivered within 5-7 days >>>

Company Tel: +86 755 27087205   Mobile: +86 13662677207 (Same number for WeChat)     Email:  yy@youyigarment.com

Shenzhen Youyi Protection Technology Co., Ltd.
CN
Aviation Ground Crew FR Suit Aviation Ground Crew FR Suit

Aviation Ground Crew FR Suit

News / 2026.11.18

  Ground handling at an airport is a mixed environment: apron refuelling, de-icing, cargo loading, towing and maintenance. The job brings oil products and solvents, and sometimes proximity to hot components. Protective clothing therefore has to combine flame resistance, oil resistance, abrasion resistance and freedom of movement. If purchasing compares only the per-piece quote, the budget is easily eaten later by replacement frequency, laundry wear and replenishment rhythm. Cost these parts separately and prices become comparable.

  Fabric cost: four variables behind the unit price Fabric usually accounts for a large share of the per-piece cost, and its unit price is set by four variables: fiber recipe, weight, weave structure and color process. Full aramid fabric holds flame performance steadily but costs more; blending aramid with flame-retardant viscose or modacrylic lowers cost at the expense of strength and abrasion resistance. Raising weight from 200 to 260 grams per square meter increases material consumption directly, adding protection margin while also adding heat stress and laundry difficulty. Solution dyeing costs more than piece dyeing, yet it narrows color variation and cuts rework, so on large volumes it can work out cheaper. When evaluating a quote, ask for fiber content ratio, weight and unit price rather than a single garment total.

  Trims and small parts: the easily missed portion Trim unit prices are low, but the total is not. Flame-retardant sewing thread costs several times ordinary polyester thread, and consumption follows stitch length; flame-retardant zippers, hook-and-loop fastenings and adjusters typically run two to three times the ordinary part; flame-retardant reflective tape is priced by the meter, so more placements mean more cost. Metal parts in explosion-protected grades push the price higher still. List these item by item and trims often turn out to take ten to fifteen percent of garment cost. Conversely, when a quote shows trim prices well below market, confirm whether ordinary thread or ordinary reflective tape was used, because that means protection has been weakened at the seams.

  Labor and process: hours make the difference Sewing hours depend on style complexity. On a coverall, the placket, armholes, crotch and knees all need reinforcement, and double stitching plus overlocking lengthens the operation; each added pocket, reflective strip, badge and lining layer adds hours. Small orders usually carry a higher hourly rate than large ones, because line setting and style changeover have to be absorbed. Cutting efficiency affects cost too: checked or striped fabric needs pattern matching and raises the loss rate, while a coverall's many panels mean mis-numbered pieces create rework that also lands in the cost. When requesting quotes, ask how labor is estimated, for example by standard time per operation rather than by experience.

  Testing and certification: fixed cost spread per piece Flame performance, thermal protective performance, retention after washing, colorfastness and strength testing all carry fees. Third-party testing is charged by item, and a full test set can cost as much as several dozen garments; where a specific market certification is required, fees and lead time rise further. This is fixed investment, so the larger the order, the lower the per-piece share. On small purchases, negotiate to share an already completed lot report, provided the fabric and process have not changed. Note however that report validity must correspond to the lot; one old report cannot be stretched across all future supply.

  Whole-life cost: laundering, replacement and stock Protective clothing is a consumable, and the bill does not stop at the purchase price. Industrial laundering accelerates fabric wear and performance decay, and wash count, retest intervals and replacement criteria all change annual spending. Assume a two-year service life: annual purchases plus laundry fees often exceed half of the initial purchase price. Incomplete size coverage carries hidden cost as well: a garment that fits poorly wears faster, staff are more inclined to alter it themselves, and actual service life shortens. Stock and replenishment count too: when common sizes are under-stocked, emergency purchases cost more in unit price and freight. Stocking rhythm and outsourced laundering arrangements likewise change annual spending.

  Cost fabric, trims, labor hours, testing and whole-life expenditure separately, and comparison means something. A low-price option tends to save in one segment and pay double in another. Ask suppliers to quote against these five lines, then run a three-year estimate against your own laundering and replacement rhythm. Once the numbers are clear, the choice stops depending on gut feeling.

RELATED RECOMMENDATIONS

EN ISO 11612 Protective Clothing

EN ISO 11611 Flame Retardant Suit

EN ISO 11612 Flame Retardant Suit

Fire Fighting Suit with EN469 Certification

Fire Fighting Suit for Petrochemical Industry